Summary
The STM25-500, is powered by a 21hp Lombardini diesel engine with electric start. The separate hydrostatic system with rear axle steering drives at up to 4km per hour.
21hp Lombardini Diesel Engine
2 Belt Drive
510mm Grinding Wheel with 18 Carbide Tipped Teeth
Electric Start
Hydrostatic Drive and Rear Wheel Steer
Hydrostatic Sweep
A 500mm grinding wheel, with 18 forged carbide tipped teeth, has a 950mm hydraulically powered sweep and capable of grinding stumps from 440mm above ground to 380mm below. The screen, that folds flat against the side for transport, protects the operator controlling the STM25-500 and gives extensive working visibility
Specification
Engine Make Lombardini
Engine Power 21hp Diesel
Weight 800Kg
Height 1710mm
Length 2520mm
Forward Speed 4km/h
Brakes Hydrostatic Brakes
Grinding Wheel Diameter 500mm
Fuel Tank Capacity 18 Litres Diesel
Cutter Teeth 18 x Carbide Tipped
Gradient 25% in all directions
Reach Below Ground Level 380mm
Reach Above Ground 440mm
Maximum Stump Size No Limit
Width 1045mm
Starter Electric
Steering Rear Hydraulic Axle
Cutting Sweep 950mm
Self Propelled System Hydraulic Drive