` ` ` ` `

Reviews - Wood Chipper Reviews

We offer various wood chippers, for all types of forestry work, from tracked chippers to towable chippers to PTO Wood Chippers. Manufacturers include Timberwolf, Camon, Carlton, Vermeer, Bandit Schliesing and Greenmech.

Wood Chipper Reviews

Wood Chipper Reviews

Products

1260 6inch Disc Style by Carlton

1260 6inch Disc Style

Led Taillights mounted high on the infeed out of harms way. The 1260’s taillights have heavy duty covers for extra protection. All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage. Engine Slide System disengages the engine from the cutter disk. This allows the engine to run without spinning the disk.

1790 9inch Disc Style by Carlton

1790 9inch Disc Style

LED Taillights mounted high on the infeed out of harms way. The 1790’s taillights have heavy duty covers. All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage. Live Hydraulics run directly off the engine allowing the operator to engage all hydraulic functions without the disk being engaged.

2012 12inch Disc Style by Carlton

2012 12inch Disc Style

LED Taillights mounted high on the infeed out of harms way. All Carlton chippers come with heavy duty taillight covers as standard equipment . All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage. Heavy Duty Planetary Winch with cable and choker is an option on all Carlton Chippers. This planetary winch has two speeds and the strongest pulling power available on a chipper.

2018 by Carlton

2018

Led Taillights mounted high on the infeed out of harms way. The 2018HD’s taillights have heavy duty covers for extra protection. All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage. Hydraulic Swivel Discharge quickly and easily allows the operator to fill the largest capacity chip trucks corner to corner, or direct the chips to a precise place on the lot.

Camon C50 All-One-Chipper by Camon

Camon C50 All-One-Chipper

The C50 is a tough, totally effective machine for disposing of garden waste including branches, brushwood and prunings. An important feature of this machine is its ability to be broken down, by removing the in-feed feed chute and hiding the exit chute so that the C50 can be easily placed into the boot of a car. A collecting bag comes as standard and allows the operator to leave a clean area. The honda engine is well regarded for its reliabiltiy.

Camon C275 Wood Chipper by Camon

Camon C275 Wood Chipper

The C275 features a hydraulic roller in feed system monitored by a state of the art electronic no stress device that not only prevents the blades being over feed but also reverses the hydraulic roller for a fraction of second so that the engine is able to return to full revs much quicker than it would do without this function. The Chipper is also mounted on a high speed road trailer complete with full lighting board.

Camon C80 Chipper-Shredder by Camon

Camon C80 Chipper-Shredder

This tough unit has been designed to cope with every type of garden waste from 2" branches to conifer, brambles, hedge cuttings and leaves. In using the machine the side chute is for chipping whilst the top chute is for putting in green waste that is pulversied by the 27 hammers. Tilting the machine onto its wheels makes it very light to move around and the side chute folds up to reduce its width for storage.

Camon C150 Chipper-Shredder by Camon

Camon C150 Chipper-Shredder

The C150 Chipper-Shredder is ideal for the lanscape professional who requires a heavy duty machine capable of reducing large amounts of garden waste and branches. The machine features a hardened chippping blade and 36 hammers that have an exceptionally long life time.The side chipping chute is hinged to reduce the storage size of the machine whilst the top chute can be removed to allow easy access into the main shredding chamber so that blades and hammers can be maintained.

Camon C90 Chipper Shredder by Camon

Camon C90 Chipper Shredder

The C90 All-in-One Chipper-Shredder is manufactured by Tracmaster and is designed and built for both domestic and professional use. It is a very effective solution for disposing of garden waste including branches, brushwood and prunings up to in diameter. The unique design of this outstanding machine means that material is fed first via the chipping blades and then through the shredding chamber, ensuring that the output material is reduced to recyclable mulch.

Camon C300 Shredder by Camon

Camon C300 Shredder

The C300 Commercial Shredder is designed for the volume waste reduction of material such as pallets, cardboard, wastepaper, garden prunings hedge cuttings, branches and polystyrene etc. Key to the success of the C300 is its ability to be undamaged should nails or small stones be fed into the machine, which allows waste material to be scooped up from the ground and put through the machine. The C300 is also mounted on a road fully road towable trailer.

65XP

Our most compact chipper offered is the Model 65XP. This rugged unit will easily chip brush and branches up to 6 inches in diameter. The 65XP features a wide varitey of gas and diesel engine options ranging from 25 to 37 horsepower. A wide 6" X 12" chipper opening allows the 65XP to process limby material with ease.

90XP

The Model 90XP is a compact, easy-to-tow 9-inch capacity disc-style chipper. A 9" X 17" chipper opening allows the Model 90 to process multiple stems as well as large diameter pieces up to 9 inches. This unit has been very popular among small tree services and municipality's because of its maneuverability and low operating cost. The Model 90 features a wide array of engine options ranging from 46 to 90 horsepower.

95XP

The Model 95XP is a secondary 9-inch capacity disc-chipper designed to chip fibrous material like palm fronds and vines. The disc on the Model 95XP sits at a 90º angle, compared to the normal 45º angle that most of our disc chippers feature. This set-up allows the Model 95XP to process viney and stringy material that is hard to process with a normal disc chipper. Like the model 90XP, the 95XP features a 9" X 17" chipper opening and has engine options ranging from 46 to 90 horsepower.

150XP by Bandit

150XP

The Model 150XP is the most compact of three 12-inch disc-style chippers available from Bandit. This unit has been designed for those who want an economically priced 12 inch capacity chipper that can easily be towed. The Model 150XP features a 14" X 17" chipper opening and has a 35-inch wide infeed tray. This unit features engine options ranging from 65 to 140 horsepower.

200XP by Bandit

200XP

The Model 200XP is our mid-range 12-inch disc-style chipper. This unit is slightly bigger than the 150, and features a 45-inch wide infeed tray opposed to the 35" infeed tray found on the 150XP. The 200XP is best suited for tree services that specialize in light tree removal and brush clean-up. A 14" x 17" chipper opening and powerful engine options ranging from 65 to 140 horsepower makes this unit a real workhorse.

250XP by Bandit

250XP

The Model 250XP is our largest and most popular 12-inch disc-style chipper. Because of its large 12 1/2" x 19" chipper opening and it's large 64-inch wide infeed hopper, this unit will easily chip large branches, trees, and forked material. The hydraulic feed system is also more powerful, allowing for greater pulling and compressing power. A wide variety of engine options are available for this unit, ranging from 65 to 140 horsepower.

255XP by Bandit

255XP

Introducing the new model 255XP, a powerful 15 inch diameter capacity disc style chipper, with a 15 inch X 25 inch throat opening. The feed system on the 255XP is the largest in its class featuring (2) horizontal feed wheels that are 10 5/8" diameter X 24 1/2" wide allowing for numerous piles of brush, limbs, and whole trees to be fed at one time. A wide variety of engine options from all major engine manufactures are available ranging from 115 to 213 horsepower.

280XP by Bandit

280XP

The Model 280XP is our most productive hand-fed disc-style chipper available. The feed system on this chipper is powerful enough to pull large diameter whole trees into the chipper. The Model 280XP can be fed with the optional knuckle boom loader. The large opening on the Model 280 is 18" x 20 1/2", allowing for multiple or large diameter trees to be chipped with ease.

1290XP by Bandit

1290XP

The 1290XP is the most compact of our five hand-fed drum-style chippers. Featuring our 37-inch diameter drum, the Model 1290XP can easily chip large diameter trees up to 15-inches in diameter. This drum is nearly double the diameter than that of competitive chippers in it's class, allowing for less vibration and less fuel consumption. The 1290XP has a chipper opening of 17 3/4" x 20 1/2" and features engine options from 65- to 140-horsepower.

1890XP by Bandit

1890XP

The Model 1890XP standard is a dependable drum-style chipper that has the same capacity as our 1890XP heavy-duty, but comes with smaller horsepower options. The 1890XP standard is equipped with engine options up to 140-horsepower and comes with a 20 1/2" x 26" chipper opening. This unit will process material up to and including 18 inches in diameter.

1890XP Heavy Duty by Bandit

1890XP Heavy Duty

The Model 1890xp heavy-duty is a high-capacity, hydraulic-feed drum-style chipper specifically designed for those contractors and governmental agencies who tackle full tree removals and light land clearing. With engine option starting at 160 horsepower up to 250 horsepower, this unit is suited for those who want a machine with ultimate power.

1990XP by Bandit

1990XP

The Model 1990XP is a high-powered machine designed to chip large, crotchy material. This unit is bigger and more powerful than the 1890XP, featuring a 37-inch diameter by 26-inch wide drum. The 1990XP is built with a feed system that is powerful enough to pull whole trees into the chipper. This heavy-duty feed system features a 15 3/4-inch diameter top feed wheel, 10 5/8-inch diameter by 32-inch wide bottom feed wheel.

1290

With the Drum Bandit you will get the quality of a Bandit chipper with unique features that enhance performance, reduce operational costs and lower your chipping costs. These simple, efficient brush chippers are easy to maintain. They are manufactured with a fixed-end discharge. A deflector is available to discharge material at a right angle through the rear discharge.

1690

The conventional drum chipper has been the mainstay of the utility line maintenance contractor for more than 30 years. They are easy to operate, easy to maintain and are extremely efficient. These simple, efficient brush chippers are easy to maintain. They are manufactured with a fixed end discharge. A deflector is available to discharge material at a right angle through the rear discharge. Specifications Dimensions Width 90" Height 96" Length 151" Weight 4,400 pounds

Model 1850 by Bandit

Model 1850

The Bandit Model 1850 was designed for those tree services and land clearers that specialize in light land clearing. It is compact enough that it can easily be maneuvered from one location to the next. With engine options from 250- to 325-horsepower, this unit will easily chip 18 inch diameter whole trees. Built with a heavy-duty frame and heavy-duty hydraulic components, this unit will take the everyday abuse that comes from chipping large diameter trees.

1900

Our Model 1900 is considered to be one of the top choices for land and right-of-way clearers. Some features on the 1900 include the five-wheel feed system, which is considered the best feed system ever developed for a whole tree chipper. Another feature is that the 1900 produces a dimensional, clean chip that can be used for boiler fuel. This unit is available with a Caterpillar 440- or 540- horsepower engine.

2090

For those of you who prefer drum chippers, the Model 2090 may be for you. This unit is the most compact of three whole tree drum chippers we offer. Designed to chip whole trees up to 20 inches in diameter, the 2090 is an exceptional chipper for crushing limby whole trees and tops. The 2090 is available with engine options ranging from 250- to 325-horsepower. Like the Model 1850, the Model 2090 is compact enough that it can easily be maneuvered from one location to the next.

3090

The Model 3090 is our mid-sized drum chipper that will chip whole trees up to 22 inches in diameter. This unit will make land clearing simple and quick. With a 10-foot long infeed conveyor, multiple trees can be chipped at one time, making this chipper the most convenient whole tree chipper in its class! A Caterpillar 440-horsepower Tier 3 engine provides plenty of chipping power, and allows the Model 3090 to fill a 45-foot chip van in under 20 minutes.

2400

Operations looking for a high production chipper with a large chipping capacity should take a look at our Model 2400. The Model 2400 is our largest disc-style chipper, and is designed for those land clearing operations whose main goal is production. Like the Model 1900, the 2400 features a five-feedwheel system that gives this unit unmatched crushing and pulling power. This unit features Caterpillar engine options ranging from 630- to 760-horsepower.

Model 3590 by Bandit

Model 3590

Unwanted logging waste is no longer an issue with Bandit's newest whole tree chipper. Bandit's new 700-horsepower Model 3590 transforms logging slash, land clearing waste, whole trees and brush into a uniform, saleable chip product faster and more efficiently than ever before.

Model 1850 Track by Bandit

Model 1850 Track

Take the chipper to the trees and eliminate the need to forward and skid with our Model 1850 Track. This machine rides on a Caterpillar 312B steel-tracked undercarriage, and comes with a roomy operator's cab. The 1850 Track is the most compact steel-tracked whole tree chipper we offer. This unit will work great for chipping whole trees up to 18 inches in diameter.

Model 1900 Track by Bandit

Model 1900 Track

Land clearers looking to chip multiple whole trees and significantly reduce your tree disposal cost should consider looking at the Model 1900 Track. The unit is capable of chipping multiple large diameter trees at once, and will simplify your clearing operation by eliminating the need to forward and skid material. This rugged unit is equipped with a Caterpillar 540-horsepower engine.

Model 2400 Track by Bandit

Model 2400 Track

Land- and right-of-way clearers looking for the biggest and most rugged self-propelled chipper on the market today should consider the Model 2400 Track. This unit is the largest self-propelled chipper we offer, with Caterpillar engine options ranging from 630- to 760-horsepower. Equipped with our five-feedwheel system, this unit is capable of chipping in excess of 100 tons of chips per hour, easily loading end-opening chip vans.

TW 13 / 75G by Timberwolf

TW 13 / 75G

Being both robust and hand portable, the 13/75 is very easy to manoeuvre into confined spaces. Handles material up to 75mm (3") with ease. This is the most favoured by professionals working in confined spaces.

TW18 / 100G by Timberwolf

TW18 / 100G

The best gravity feed chipper on the market. With its positive blade feed and ability to be maneuvered by one person this chipper is well worth a closer look. Will outperform many hydraulic chippers.

PTO 100G by Timberwolf

PTO 100G

With its positive blade feed and ability to be maneouvered by one person this chipper is worth a closer look. Setup to be used behind compact and small tractors. Requires 18-40hp. Ideal for parks, estates, cemeteries, golf courses etc.

TW 150FTR/VTR by Timberwolf

TW 150FTR/VTR

The most popular tracked chipper in the UK. Designed for the contractor and utility user. Incorporates state of the art anti-vibration technology and easy-feed, detachable input hopper with control bar located around the sides and top. Electro hydraulics with fixed and variable track options.

TW 190FTR / TURBO FTR by Timberwolf

TW 190FTR / TURBO FTR

A go-anywhere tracked chipper with excellent off-road performance and a chipping ability to match. Powerful and robust, this cleverly designed model is able to access the most rugged environments. Available with naturtally aspirated or turbo-charged engine for even greater throughput.

TW 150DH/DHB by Timberwolf

TW 150DH/DHB

The most popular chipper in the UK for many years despite having over 10 comparable competitor models available! The 150DHB has been in production for 10 years and represents unbeatable performance vs value for money. A superb chipper for anyone looking for excellent all-round performance without paying an excessive price

TW 190DH/TURBO DH by Timberwolf

TW 190DH/TURBO DH

The ultimate contractor's machine for working 24-7. Built to the very highest standards, it will tackle the toughest jobs with the minimum of maintenance. This machine will satisfy the most demanding professional users. Available with naturally aspirated or turbo-charged engine for even greater throughput.

TW 125PH by Timberwolf

TW 125PH

Twin feed rollers give this machine exceptional performance for a chipper of this size. Ideal for landscapers or for towing behind ATV's etc.

TW 250DH Turbo (Turntable) by Timberwolf

TW 250DH Turbo (Turntable)

The Timberwolf 250DH Turbo 10" woodchipper sets new standards in the next generation of high performance brushwood chippers. Featuring a turntable which rotates through 360º, this technologically advanced chipper gives the operator a choice of working positions to suit the job in hand and provides increased roadside safety. Stability and ease of towing are afforded by the twin axle trailer and all up weight of around 2 tonnes.

PTO 150H by Timberwolf

PTO 150H

Derived from the TW 150DHB, excellent performance is assured. Set up to be used behind small tractors - idea for large estates, local authorities, golf courses etc.

PTO 300H by Timberwolf

PTO 300H

Genuine 300mm (12") chipping capability from this awesome machine. For those with serious amounts of green waste to shift, nothing does it quicker or easier - a real contractor's machine.

BC600XL Brush Chipper by Vermeer

BC600XL Brush Chipper

Compact, feature packed and ready to produce results. Job after job, the Vermeer® 600 series of brush chippers have proven their reputation as the leader in its class of machines. Known for its ease-of-use and transportability, the compact, feature-packed 600 series is a top-of-the-line performer.

BC1000XL by Vermeer

BC1000XL

Maximum power from a 12" (30 cm) chipper. The BC1000XL combines an impressive 85 HP (63 kw) engine, a large 12" x 17" (30 cm x 43 cm) feed opening, a clutchless PTO and a rubber-torsion suspension for maximum performance in the field. The BC1000XL also offers a noise-reducing design and has an optional sound-abatement package available that makes it one of the quietest and most productive chippers in the field.

BC1400TX by Vermeer

BC1400TX

A machine that can help brush aside job site pressures. Vermeer continues a "total solutions" approach to product development with the introduction of a new brush chipper with a track undercarriage - the BC1400TX. Equipped with a CAT 304 undercarriage the BC1400TX track design offers lower ground pressure than towed units helping to reduce ground disturbance.

BC1500 by Vermeer

BC1500

A Chip off the Old Block! When it comes to the tree care industry, there is a line of brush chippers that have earned a reputation for jobsite productivity and operator safety features: Vermeer. The Vermeer BC1500 is yet another innovative machine designed for natural disaster cleanup or other applications in which contractors and municipalities require a 15" (38 cm) chipping capacity.

BC1800XL by Vermeer

BC1800XL

Speed and large capacity equals high productivity. When the jobsite calls for large diameter chipping, look to the Vermeer BC1800XL brush chipper. Built with strength for demanding conditions, the BC1800XL possesses the power and features needed for land-clearing and tree care operations. The BC1800XL is available with three John Deere Tier 3 engine options including a 115 hp (85 kW), 125 hp (93 kW) or 140 hp (104 kW) diesel.

BC2000XL by Vermeer

BC2000XL

A more powerful way to clear. The Vermeer BC2000XL brush chipper handles high-volume organic chipping projects with ease. With three Caterpillar Tier II engine options, the drum-style chipper is big enough to tackle some of the toughest land-clearing jobs. Dual spring-tensioned feed rollers feature a unique vertical design adjusting to handle unusual bends and twists in brush material and adapting in size to handle limbs up to 20" (51 cm) in diameter.

1590XP by Bandit

1590XP

Our intermediate drum chipper, the Model , has become our most popular hydraulic-feed drum-style chipper. Like the 1290XP, the 1590XP also features our 37-inch diameter drum, but has a bigger throat opening: an amazing 18" x 20 1/2." This larger opening allows it to effectively compress limby and crotchy material. Diesel engine options range from 65 to 140 horsepower. The 1590XP also features a larger infeed hopper that can effectively compress large amounts of brush and trees. This unit is

2090 Track by Bandit

2090 Track

The Model 2090 Track is equipped with many of the same features found on our Model 1850 Track. The drum-style Model 2090 Track rides around on a Caterpillar 312B steel-tracked undercarriage and features engine options ranging from 250- to 325-horsepower. The Model 2090 Track is known for it's large chipper opening, which allows for limby and forked material to be chipped with ease.

BC935 by Vermeer

BC935

Rugged, reliable and easy to handle. The BC935 is a medium-size, self-feeding, disc-style chipper with a large fold-up feed table. The optional AutoFeed II® system monitors engine RPMs and controls feeding action. Live hydraulics enable the operator to reverse feed material while the engine is running — without engaging the cutter wheel. Handles material up to 9" (23 cm) in diameter.

105MX by Schliesing

105MX

The entry level machine to the Schliesing range. This chipper performs like no other small chipper, utilising it’s 200mm wide feed rollers to out perform other machines which have larger engines and claim greater capacities. Built to the same exacting standards of all Schliesing woodchippers this machine provides reliability and durability unmatched by any other marque.

200MX by Schliesing

200MX

The 200 Series is built simply to perform. Built like no other chipper in it’s class this machine will not be compromised for weight. The 240mm (9.5˝) wide feed rollers enable effortless feeding of even the most awkward material, saving hours of unneccessary snedding. For those looking for a 6˝ machine that will out perform and outlast all of it’s competitors, there is only one choice.

220MX by Schliesing

220MX

Unmatched by any other chipper of this size, the 220ZX is in a class of it’s own. With “Power Grip” feed rollers and Schliesing’s Power Control System as standard, the 220 ensures effortless feeding of even the most awkward material.

300MX by Schliesing

300MX

A big brother to the 220MX. Sharing the 220’s class leading features. The 300MX has enlarged feed rollers and feed aperture , with a 45Hp Kubota Turbocharged Diesel Engine. With serious crushing power and enormous throughput, Schliesing have again created another model unmatched by any other 8˝ woodchipper.

350EX and 360EX by Schliesing

350EX and 360EX

Clever design enables this chipper to uphold Schliesing’s legendary build quality whilst producing a compact machine that is ideally suited to the UK Market. The single axle enables easier manoeuvrability on and off the vehicle and reduces drag whilst towing. A self levelling tow head ensures the chipper is level at all times. Performance is as you would expect: AWESOME!

350MX 360MX by Schliesing

350MX 360MX

Twin axles towable unit with self levelling draw bar. This unit is available with a choice of Deutz or Hatz Diesel engines, Very robust construction with no compromises this machine is extremely popular with local authorities and contractors.

460EX 480EX by Schliesing

460EX 480EX

Clever design enables this chipper to uphold Schliesing’s legendary build quality whilst producing a compact machine that is ideally suited to the UK Market. The single axle enables easier manoeuvrability on and off the vehicle and reduces drag whilst towing. A self levelling tow head ensures the chipper is level at all times. Performance is as you would expect: AWESOME!

460MX 480MX by Schliesing

460MX 480MX

Twin axles towable unit with self levelling draw bar. This unit is available with a choice of Deutz or Hatz Diesel engines, Very robust construction with no compromises this machine is extremely popular with local authorities and contractors.

500MX by Schliesing

500MX

The ULTIMATE 10" Woodchipper. For those who want to chip to capacity all day long. A self levelling tow head ensures the chipper is level at all times. Performance is as you would expect: AWESOME! An established design that has been proven over time.

550MX by Schliesing

550MX

Designed to be strong, built to be even stronger. Design features unseen on other makes of chipper enable this machine to stand out from all others. Performance is as you would expect: AWESOME! For the true professional who demands the best.

550MX by Schliesing

550MX

Designed to be strong, built to be even stronger. Design features unseen on other makes of chipper enable this machine to stand out from all others. Performance is as you would expect: AWESOME! For the true professional who demands the best.

220MX TR by Schliesing

220MX TR

Designed specifically for the UK market place, the 220MXTR PRO offers inbuilt strength and durability unrivalled by any other chipper in this category. Powered by the Kubota V1505 Diesel engine performance starts with the amazing 240mm wide power grip feed rollers. The widest most powerful feed rollers in this class ensure easy feeding of even the most awkward material. The material is then fed onto the 660mm x 35mm Flywheel weighing in excess of 100 kgs, with 2 full width 270mm wide blades. The

300MXTR Bank by Schliesing

300MXTR Bank

Equipped with two levels of road speed you can quickly and easily reach the place of application with this crawler model. Two separate hydraulic flow systems for left and right track offer safe driving even in rough terrain.Stepless and independent operation of each individual track gives the ability to self-level on side slopes for an optimal working position in every location. Large-sized sprockets in the undercarriage, well-known from the construction machinery area, ensure optimal use on s

105ZX by Schliesing

105ZX

The entry level machine to the Schliesing range. This chipper performs like no other small chipper, utilising it’s 200mm wide feed rollers to out perform other machines which claim greater capacities. Built to the same exacting standards of all Schliesing woodchippers this machine provides reliability and durability unmatched by any other marque.

200ZX by Schliesing

200ZX

The 200 Series is built simply to perform. Built like no other chipper in it’s class this machine will not be compromised for weight. The 240mm (9.5˝) wide feed rollers enable effortless feeding of even the most awkward material, saving hours of unneccessary snedding. For those looking for a 6˝ machine that will out perform and outlast all of it’s competitors, there is only one choice.

220ZX by Schliesing

220ZX

Unmatched by any other chipper of this size, the 220MX is in a class of it’s own. With “Power Grip” feed rollers and Schliesing’s Power Control System as standard, the 220 ensures effortless feeding of even the most awkward material.

330ZX by Schliesing

330ZX

A True 8" Woodchipper. It’s 240mm wide powergrip feed rollers with serious crushing power make this a must for the serious user who requires a mid size machine.Schliesing have again created another model unmatched by any other 8˝ woodchipper.

400ZX by Schliesing

400ZX

A True 9" Woodchipper. It’s 240mm wide powergrip feed rollers with serious crushing power make this a must for the serious user who requires a mid size machine. Schliesing have again created another model unmatched by any other 9˝ woodchipper

440ZX by Schliesing

440ZX

Like the 400ZX but with extra wide 300mm Power Grip Feed Rollers. This enables effortless feeding of even the awkward material.

500ZX by Schliesing

500ZX

A True 10" Woodchipper with 310mm wide powergrip feed rollers giving serious crushing power. Available in various formats to ensure you get a machine to suit your needs.

550ZX by Schliesing

550ZX

Designed to be strong, built to be even stronger. Design features unseen on other makes of chipper enable this machine to stand out from all others. Performance is as you would expect: AWESOME! For the true professional who demands the best. .

550 MX ZX-Forestry by Schliesing

550 MX ZX-Forestry

With this new top model, the 550 MX ZX-Forestry, Schliesing implements customer wishes. This model offers peak performance provided by the powerful infeed, which is fed by an optimally integrated forestry crane, as well as the strong chipping force of the massive chipping disc for wood up to 30 cm Ø

550 MX ZX-Forestry by Schliesing

550 MX ZX-Forestry

With this new top model, the 550 MX ZX-Forestry, Schliesing implements customer wishes. This model offers peak performance provided by the powerful infeed, which is fed by an optimally integrated forestry crane, as well as the strong chipping force of the massive chipping disc for wood up to 30 cm Ø

400 / 550 U by Schliesing

400 / 550 U

High Capacity Chipper for Front Mounting on Unimog

Arborist 15-23 (Diesel) by Greenmech

Arborist 15-23 (Diesel)

The Arborist 15-23 is a 150mm x 230mm capacity machine with a 26 hp water-cooled diesel engine, single feed roller (twin roller option), No-Stress power control. A convenient infeed height and top and side control/safety bar eliminates most nuisance tripping. Compact transport mode is given by the folding infeed chute which allows the chipper to fit inside your garage for safe storage. Road towable, and even the 34hp machine with twin feed rollers and braked chassis is under the 750kg towing lim

Arborist 15-23 (Petrol) by Greenmech

Arborist 15-23 (Petrol)

The Arborist 15-23 petrol is a 150mm x 230mm capacity machine with a 27 hp petrol engine, single feed roller (twin roller option), No-Stress power control. A unique design allows a convenient infeed height with a top and side control/safety bar, eliminating most nuisance tripping. The folding infeed chute gives a compact transport mode and allows the chipper to fit inside your garage for safe storage. Road towable, and under the 750kg towing limit with an un-braked chassis (brakes available as o

Arborist 16-23 by Greenmech

Arborist 16-23

The Arborist 16-23 is a 6.5-inch x 9-inch(160mm x 230mm) capacity machine which has a 35 hp water cooled diesel and twin hydraulic feed rollers. With No-Stress power control, letter box style infeed throat is 230mm (9-inches) by 160mm (6.5-inches)it is able to process awkward shaped material with ease. A unique design allows a convenient infeed height with a top and side control/safety bar, eliminating most nuisance tripping whilst being fully HSE compliant. Road towable with a fully braked chas

Arborist 19-28 by Greenmech

Arborist 19-28

When we introduced the Arborist 15-23 we did not fully appreciating that it would be the start of a New Generation of Chippers.

Chipmaster 220MT55 by Greenmech

Chipmaster 220MT55

The new CM220MT55, the replacement for the very successful CM202MT55, is designed to meet the proposed new safety standards prior to their introduction later this year.

Chipmaster 260MT70 by Greenmech

Chipmaster 260MT70

The largest of the ChipMaster range, the CM260MT70 offers power and cutting efficiency combined with GreenMech’s reliability.

Eco-Combi ECM150MT35 by Greenmech

Eco-Combi ECM150MT35

Eco-Combi, a combined Chipper/Shredder won Best New Landscape Product Award at Saltex ’98 and a Silver Medal at SED 1999.

SAFE-Trak STC19-28MT50 by Greenmech

SAFE-Trak STC19-28MT50

All makes of Traked Chipper up until now have suffered from: Poor stability on sloping ground. Lack of ground clearance Too wide for restricted access.

SAFE-Trak STC220MT55 by Greenmech

SAFE-Trak STC220MT55

All makes of Traked Chipper up until now have suffered from: Poor stability on sloping ground. Lack of ground clearance Too wide for restricted access.

SAFE-Trak16-23 by Greenmech

SAFE-Trak16-23

All makes of Traked Chipper up until now have suffered from: Poor stability on sloping ground. Lack of ground clearance Too wide for restricted access.

CM220TMP by Greenmech

CM220TMP

The tractor mounted ChipMaster Wood Chipper has a capacity of220mm and the unique cost saving ‘Disc-Blade’ chipping system ensuring a constant chip quality. The tractor mounted Chipper has all the standard features of the ChipMaster range. The large infeed chute leads to twin hydraulic feed rollers controlled by the GreenMech advanced No Stress System. The CM220TMP has the option of a bolt on wheeled chassis and draw bar enabling the machines to be used on smaller tractors.

EC150TMP by Greenmech

EC150TMP

The EC150TMP, has been designed to fit the 3-point linkage on compact tractors of 20- 40hp, is powered by the tractor PTO and uses the tractor hydraulics.

Quicklinks