Buffalo 34 by Allett Mowers

Summary

The Buffalo is a very compact, well balanced machine and is highly manoeuvrable in confined areas. The mower has a low profile for good forward visibility. Despite its light weight, the Buffalo 34 is very robust and both long life and easy servicing are assured. The rear roller is in three sections and is rubber covered for good traction and silent running over hard surfaces. Internally, the rear roller is fitted with hardened steel differential gears, which run in a sealed oil bath.

Specifications

Cutting Width	863.6mm (34”)
Overall Width	1041mm (41”)
Weight	175kg (385lb)
Engine	Honda GX160 5.5hp ohv petrol.
Overall Height	1010mm (40”)
Overall Length	1280mm (50”)
Rate of Cut	66 cuts per metre (60 cuts per yard / 1.66 cuts per inch)
Height of Cut	10mm to 40mm (3/8” to 1.5”)
Drive Clutch	Handle mounted lever operating tight and loose V belt via a cable.
Cutter Clutch	Handle mounted lever operating tight and loose triple V belts via a cable.
Rear Roller	Three piece steel sections, rubber covered.
Differential	Hardened steel gears running in a sealed oil bath.
Front Roller	Aluminium running on sealed bearings.
Cylinder	6 bladed, all welded, high carbon spring steel, Mounted on greaseable bearings.
Bottom Blade	Manufactured from EN8 hardened and tempered to 45HRC.
Handle Bar	Adjustable with anti-vibration mountings.
Grassbox	Rotationally moulded plastic with steel reinforcing strip.
Optional Extras	Trailing seat.