Buffalo by Allett Mowers

Summary

The Buffalo is an extremely rugged mower with a large diameter cutting cylinder giving it the ability to cut long grass even in wet conditions that leave other cylinder mowers in the shed! Designed to operate on low engine revs. This is to reduce fuel consumption, noise and vibration levels and wear and tear on the mower, the operator and the environment.

Specifications

	20” Buffalo	24” Buffalo	27” Buffalo
Cutting Width	510mm (20”)	610mm (24”)	686mm (27”)
Overall Width	686mm (27”)	787mm (31’)	864mm (34”)
Weight	111kg (2445lb)	122kg (269lb)	138kg (304lb)
Engine	Honda GX120 4hp	Honda GX160 5.5hp	Honda GX160 5.5hp
Overall Height	1010mm (40”)
Overall Length	1280mm (50”)
Rate of Cut	82 cuts per metre (75 cuts per yard / 2.1 cuts per inch)
Height of Cut	10mm to 40mm (3/8” to 1.5”)
Drive Clutch	Handle mounted lever operating tight and loose V belt via a cable.
Cutter Clutch	Handle mounted lever operating tight and loose twin V belts via a cable (triple belts on 27” machines).
Rear Roller	Two piece steel, rubber covered with bevel gear differential.
Front Roller	All steel on sealed bearings.
Cylinder	6 bladed, all welded, high carbon spring steel, hardened and tempered to 45HRC Mounted on greaseable bearings.
Bottom Blade	Manufactured from EN8 hardened and tempered to 45HRC.
Handle Bar	Adjustable with anti-vibration mountings.
Grassbox	Rotationally moulded plastic with steel reinforcing strip.
Optional Extras	Pneumatic rear wheels and front stub rollers.